RADIUS NETWORKS RADBEACON MOBILINC UPDATE
RADIUS NETWORKS RADBEACON MOBILINC FOR ANDROID
RADIUS NETWORKS RADBEACON MOBILINC ANDROID
RADIUS NETWORKS RADBEACON MOBILINC BLUETOOTH

The Lock feature is a security precaution to limit the possibility of third party manipulation of your beacons once they have been installed and configured.

RADIUS NETWORKS RADBEACON MOBILINC BLUETOOTH

Select the Lock button to submit a valid PIN to prevent connections from remote Bluetooth 4.0 devices to the beacon configuration service. Submit a valid PIN to reset the settings for your beacon to factory defaults. Select the Reset button to reset the device to the original factory settings.

RADIUS NETWORKS RADBEACON MOBILINC UPDATE

Select the Update PIN button to submit a new and existing PIN to update the PIN for your beacon. Advertised Organizational Identifier Ĭhange any of the modifiable settings and select the Apply button to submit a valid PIN to update the settings for this beacon.

Select any RadBeacon in the table to view it's detailed settings. Each beacon discovered is displayed with the following summary details Scan for nearby configurable RadBeacons by pressing the Start Scanning button. Once discovered, you can display each beacon's operating settings and make modifications to those settings. With the RadBeacon app you can scan for nearby configurable Radius Networks beacons. The RadBeacon app from Radius Networks requires a Macintosh computer running OS X 10.9 or higher and equipped with Bluetooth 4.0 capabilities. In order to re-enter normal operational model, simply remove and replace power to the device.The RadBeacon™ app is the configuration utility for RadBeacon proximity beacons from Radius Networks that support Apple's iBeacon™ proximity services as well as other emerging proximity services. Reboot the beacon into Direct Firmware Update mode.Ĭontact Radius Networks support for information on the procedure for firmware update or replacement. Press the Action Menu button and select DFU. In order to re-enter configurable mode for a RadBeacon X2, remove the front cover and switch the beacon power switch to OFF and back to ON.Ī beacon set in configurable mode will be configurable for up to 30 minutes or until you lock the device again. In order to re-enter configurable mode for a RadBeacon Tag, remove the front cover and press the configuration push button switch near the coin cell battery. In order to re-enter configurable mode for a RadBeacon USB, remove and restore power to the device. Submit a valid PIN to prevent connections from remote Bluetooth 4.0 devices to the beacon configuration service. Press the Action Menu button and select Lock. Reset the device to the original factory settings. Press the Action Menu button and select Reset. Submit a new and existing PIN to update the PIN for your beacon. Press the Action Menu button and select Update PIN.

Validate the accuracy of your beacon settings by quickly verifying the ranging behavior of your device in proximity to your configured beacon. Press the Action Menu button and select Range. Update the measured power value with the results of your calibration activity and update your settings. Press the Action Menu button and select Calibrate.Ĭalibrate the measured power value of the beacon settings to ensure optimal proximity events and ranging. Submit a valid PIN to update the settings for this beacon. (If the RadBeacon is not configurable, then an 'unable to connect' message will be displayed after approximately 15 seconds.) The settings displayed include: If the RadBeacon is configurable, its detailed settings will be displayed. Scan for nearby configurable RadBeacons by pressing the SCAN button. Once discovered, if the beacon is configurable, you can display each beacon's operating settings and make modifications to those settings. With the RadBeacon app you can scan for nearby Radius Networks beacons.

RADIUS NETWORKS RADBEACON MOBILINC ANDROID

The RadBeacon app from Radius Networks requires an Android device running Android 4.3 or higher and equipped with Bluetooth 4.0 capabilities.

RADIUS NETWORKS RADBEACON MOBILINC FOR ANDROID

The RadBeacon™ app is the configuration utility for RadBeacon proximity beacons from Radius Networks that support Apple's iBeacon™ proximity services and the AltBeacon proximity services for Android devices.

Radius networks radbeacon mobilinc